TPMS sensors with bluetooth for GPS Tracker, TPMS receiver

Product No.: TS06-BLE, TS06-LB-BLE, TS08-BLE, TS09-BLE, TS10-BLE

These wireless TPMS bluetooth sensors are developed on Bluetooth4.2. All TPMS data would be transmitted via bluetooth.

These wireless TPMS bluetooth sensors are supported in our GPS tracker, TPMS receiver, signal repeater, and handheld TPMS ID reader. All TPMS sensors send TPMS data via Fleet managers or installation technicians can choose different types of tire pressure sensors to install onto vehicles with client’s needs or working environments.

TPMS bluetooth sensor SPECS

External cap tire pressure sensor TS06-BLE

TS06-BLE should be installed on the tire valve stem outside, locked by a nut on the same tire valve stem; it’s easily installed. You just need to install a nut first, then TS06 sensor onto the tire valve stem. And the TS06 sensor needs to be locked by rotating the nut as far up as you can.

External cap tire sensor TS06-LB-BLE

TS06-LB-BLE is almost the same as TS06, but especially for large bores like OTR tires or mining machines. Its installation is the same as TS06’s.

Externally valve stem fixed

pressure range	1-13Bar(100kPa-1300kPa), 1-9Bar(100kPa-900kPa)
Temperature	Setting Range: -20°C–93°C Operation/Storage Temperature: -20°C–93°C
wireless Frequency	2.4G
wireless communication protocol standard	bluetooth 4.2
Battery	Lithium-Manganese Button Cell Battery
Battery working temperature	40°C–85°C
Standby Battery life	≥4 years
Application Scope	TS06: truck, bus, etc; TS06-LB: OTR tires and mining vehicles of large bores
Size	27 ×28 mm (TS06-BLE) \| 27 ×31mm (TS06-LB-BLE)(ø x h)
Weight	TS06: 28g; TS06-LB: 42g
Accuracy	Pressure: ±3kPa; Temperature: ±2℃
Transmission Power	≤10dBm

tpms sensor ts06 for truck — external cap TPMS sensors TS06-BLE

tire sensor ts06 lb inner size 2 — External cap sensor for large bore: TS06-LB-BLE

Internal Valve Tire Pressure Sensor

Internal valve sensor TS08-BLE

TS08-BLE is designed to be installed inside the tire and fixed onto the tire valve stem inside. It is for tubeless tires. It needs a driver or technician to uninstall the tire from the vehicle first and take the tire out of the wheel rim. It also needs to replace the original tire valve stem with a specially designed tire valve stem that has a specially designed end used to fix the internal sensor.

Internally valve stem fixed

pressure range	1-13Bar(100kPa-1300kPa), 1-9Bar(100kPa-900kPa)
Temperature	Setting Range: -20°C–93°C Operation/Storage Temperature: -20°C–93°C
wireless Frequency	2.4G
wireless communication protocol standard	bluetooth 4.2
Battery	Lithium-Manganese Button Cell Battery
Battery working temperature	-40°C–85°C
Standby Battery life	≥4 years
Size	6×3×2cm
Weight	50g
Accuracy	Pressure: ±3kPa; Temperature: ±2℃
Transmission Power	≤10dBm

internal valve sensor TS08 — Internal valve sensor TS08-BLE

External cap air flow through sensor TS09-BLE

TS09-BLE is designed with an air flow through function realized by an extended tire valve stem which is in TS09 sensor itself. So users can inflate tires without uninstalling the tire pressure sensors. The extended valve stem can be used to fill air into the tire directly.

External Air Flow Through Sensor

pressure range	1-13Bar(100kPa-1300kPa), 1-9Bar(100kPa-900kPa)
Temperature	Setting Range: -20°C–93°C Operation/Storage Temperature: -20°C–93°C
wireless Frequency	2.4G
wireless communication protocol standard	bluetooth 4.2
Battery	Lithium-Manganese Button Cell Battery
Battery working temperature	-40°C–85°C
Standby Battery life	≥4 years
Application Scope	TS09: truck, bus, etc; TS09-LB: OTR tires and mining vehicles of large bores
Size	TS09: 6×2.7×2cm; TS09-LB: 93.55.3cm
Weight	TS09-BLE: 30g; TS09-LB-BLE: 80g
Accuracy	Pressure: ±3kPa; Temperature: ±2℃
Transmission Power	≤10dBm

air flow through tpms sensor ts09 — Internal valve sensor TS09-BLE

Internal banded sensor TS10-BLE

TS10-BLE is designed to be installed inside the tire, but fixed onto the wheel rim by band, or sticked to inside of tire with glue like a tag. It is for tubeless tires also. Users should first know the length of the band to make sure it’s longer than the circumference of the wheel rim. It also requires uninstalling tires from the vehicle first.

Internal banded Sensor

Internally tire rim fixed or internally tag-type attached with glue

pressure range	1-13Bar(100kPa-1300kPa), 1-9Bar(100kPa-900kPa)
Temperature	Setting Range: -20°C–93°C Operation/Storage Temperature: -20°C–93°C
wireless Frequency	2.4G
wireless communication protocol standard	bluetooth 4.2
Battery	Lithium-Manganese Button Cell Battery
Battery working temperature	-40°C–85°C
Standby Battery life	≥4 years
Size	6×3.1×2cm
Weight	150g(including bands)
Accuracy	Pressure: ±3kPa; Temperature: ±2℃
Transmission Power	≤10dBm

internal banded tire sensor: TS10 — Internal banded tire sensor: TS10-BLE

band — Stainless Metal Strap for Internal Banded Sensor

silicon case for tire internal sensor — Silicon case for internal sensor

Tire Pressure Sensors Installation

The tire pressure monitoring system (TPMS) consists of two parts: the sensor emitter and the receiver. Communication between the sensor and receiver is by wireless technology (433.92MHz). The receiver in the system can be our AT09 device or TPxx device; they can work together or independently as a standalone system with the sensor.

Note: the front and the rear truck tire maybe has different types of RIM. Please check the target tire you are going to install the sensor on. And choose the suitable type.

Sensors Installation: TS07/09

Step 1: Find the valve.

Step 2: Remove the valve cap and install the hex screw of the sensor on the valve.

Step 3: screw the sensor onto the valve. And use the hex wrench to lock the sensor with the hex screw.

(Below image suitable for TS09)

Sensors Installation: TS08:

Step 1: Dismount the tire from the RIM.

Step 2: Remove the original tire valve stem.

Step 3: Insert the new sensor through the valve stem hole, making sure the flat side of the sensor is toward the rim, and then install the screw cap on the outside.